|
1、犁头的部分分为前部合金高铬猛或石棉材质的前犁头和耐磨胶板的后犁头，使卸料更干净。
Ploughshares into the front part of the high-chromium alloy or asbestos material before the fierce and wear plastic sheet after Ploughshares Ploughshares, the discharge cleaner
2、驱动部分是国内最新产品手电两用机械式电液推杆。克服了电动推杆过载能力差、易烧电 机、卡死、顶弯丝杆等缺陷，普通电液推杆内外泄漏、不自锁、下滑、爬行等新的弊端。Driving part is the latest product flashlight dual mechanical electro-hydraulic putter. Overcome the electric putter overload poor, easy to burn the motor, stuck, turn screw top and other defects, ordinary electro-hydraulic leak outside putter, not self-locking, down, crawling and other new defects.
3、锁气器翻板采用高锰铬耐磨材料，使用寿命延长了达20年，而且维修量也减少了。Air lock flap made of high manganese chromium wear-resistant materials, extending the service life of 20 years, and also reduces the amount of maintenance
4、犁头增加的锁紧装置为机械式抓拉式，可调节犁刀的高低，以最佳面贴近皮带，工作时犁刀不会因煤的：中击力而抬起或抖动，避免了胶带被撕裂、磨损及漏煤现象。Ploughshares additional locking device is a mechanical grab pull, adjustable coulter level, close to the best side belt will not work coulter coal: the strike force to lift or jitter, avoiding the tape is torn, worn and coal leakage phenomenon.
5、锁气部分的使用： 使物料均匀分布，防止跑偏和粘料及沿途撒料。减少诱导鼓风，使其减速小到原来的10%以下。The use of air lock parts: the materials evenly to prevent deviation and sticky materials along the scattering material. Blast-induced reduction, slow it down to the original smaller than 10%.
犁式卸料器的分类，按设备卸料的位置可分为：单侧和双侧两种。按动力形式可分为：电动的、手动的和电液推动的三种。按设备安装形式可分：左面装和右面装两种。按推杆安装形式可分为：上推杆和侧推杆两种。
| 
您的位置：